Click Round used on perforated sheet with large holes
The click profile is designed to give ridgidity to perforated sheet while finishing the edge of a sheet.
High tensile woven mesh balustrade
This type of balustrading is made up from high tensile wire which are crimped and weaved together to form woven mesh panels. The density of the mesh can be regulated by increasing or decreasing the wire thickness in relation to the mesh size i.e. a 25mm clear mesh can be supplied in 3mm to 8mm diameter wire.
Perforated Sheeting with small holes close together
This type of balustrading is made up from lightweight sheet with a high open area but because it is curved it has a lot of regidity.
U strip edging
Curved Perforated sheet with small holes edged with a U strip so as to create a flush flat finish to the edge of the sheet.
Balcony Balustrading with Round K safedeck
Perforated balustrate sheeting with a 9.5mm round hole at 14.2mm staggered pitch in 3.0mm thick material which gives a 40% open area, also used on this job as shown on the photo was our Round K safedeck.
Balcony Balustrading
Perforated sheeting framed and edged using U Strip edging profile. If has been hot dipped galvanised and painted.
